|
DUPLEX MULTIPLEXER |
|
Video Standard
|
NTSC (525 lines, 60 fields/second) or PAL (625 lines, 50
fields/second) |
|
Digital Memory
|
730 x 464 pixels full screen to VCR; 8-bit luma, 256 shades
of gray |
|
Motion Detection Parameters
|
|
Target Matrix
|
16 horizontal x 12 vertical (192 total) |
|
Sensitivity
|
5 levels |
|
Object Size
|
81 combinations of width and height |
|
Tracking Delay
|
0 to 5 seconds |
|
Alarm Duration
|
Programmable 2 to 999 seconds,4 seconds default |
|
Motion Alarm Recording |
|
Settings
|
Each video channel has independent settings for day and night |
|
Alarm Enable
|
On, Off or And (requires concurrent contact closure) |
|
Remote Control |
Via Remote Control Panel daisy-chain up to 16 multiplexers;
via computer software
control up to 255 multiplexers |
|
Inputs/Outputs
|
|
Video Input
|
16 looping, 1 V p-p, composite, individually selectable 75 ohms
or High-Z, BNC |
|
Monitor Output
|
Two, 1 V p-p composite, 75 ohms, BNC |
|
VCR Input/Output Composite
|
One each, 1 V p-p, 75 ohms, BNC |
|
VCR Input/Output
S-Video
|
One each, 1 V p-p S-Luma, 75 ohms, S-Video |
|
Alarm Connector
|
DB37S (includes DB37P mating connector) |
|
Alarm Input
|
16, programmable as normally open or normally closed |
|
Alarm Hold Input
|
+5 to +15 VDC or TTLActive High |
|
Common Alarm Output
|
One, normally open or closed contacts, 1.0A not to exceed
42VAC or 60VDC, resistive only |
|
Motion Alarm Output
|
16 Active High or Low TTL compatible (one per camera) |
|
Remote Control
|
RS-232, RJ11 In and Out |
| Operating Power |
Center positive, 12 VDC; 1.5A, 18 watts, 2.1mm pin jack,
separate AC power supply included |
| Dimensions |
1.75 in. H x 17 in. W x 12.25 in. D
(44mm x 432mm x 311mm) |
| Temperature |
40° to 104° F (5° to 40° C) |
